Easy™ Puff Metallic Heat Transfer Vinyl

Puff and shine that looks divine!

Featuring the same fun puffy effect as our standard Easy Puff, Easy Puff Metallic adds a new twist: a brilliant shiny finish! After heat applying, simply peel the carrier hot and heat press a second time to activate the puff. Designs will not only expand into 3D, but they'll also give off a beautiful gold or silver sheen! Perfect for big and bold artwork, Easy Puff Metallic has a unique look unlike anything you've seen before!

Easy™ Puff is CPSIA Certified so it's perfect for decorating children's clothing and accessories.

• Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press application process. After the first press, the carrier must be peeled hot and the design should be covered with a cover sheet, then pressed a second time to activate the puff effect.

• Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.

• Texture of applied material can vary from lightly textured to heavily textured.

CUTTER SETTINGS
Siser Romeo & Juliet: Blade: 45°/60° Gram Force: 10-20 Offset: .250 Speed: 10	Cricut Maker: Blade: AutoBlade, Fine-Point Setting: Heat Transfer (Non-Circut)	Brother Scan N Cut DX: Blade: AutoBlade Cut Speed: 5 Half Cut: Auto	Silhouette Cameo 4: Blade: AutoBlade, 3 Material: Heat Transfer, Smooth Force: 6 Speed: 8
Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s	Graphtec: Blade: 45° Gram Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s	US Cutter Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies	Mimaki CG-60SR III Blade: 45° Gram Force: 80 Offset: 30 Speed: 20-30 cm/s
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

APPLICATION INSTRUCTIONS
Application Instructions (home iron) • It is not recommended to apply this material with a home iron.	Application Instructions (heat press) • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 2-3 seconds • Apply design at 280°F/138°C • Use medium pressure for 10 seconds • Peel carrier hot • Use medium pressure for 10 additional seconds • If areas of design lift after application, replace cover sheet and re-press for 5~10 seconds

RECOMMENDED ACCESSORIES & CARE
Easy Puff Metallic Applies to: 100% cotton Poly/cotton blends 100% polyester	Recommended Accessories: Siser Weeder		Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean